Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Talk about Synology related topics in general, not hardware, software or app specific.
- Threads: 1,070
- Messages: 9,082
Ask SynoBOT
Ask SynoBOT anything about Synology, networking or similar. It is a ChatGPT AI-powered virtual assistant designed to help answer questions, provide information, and engage in conversations with users.
- Threads
- 24
- Messages
- 132
Filter by prefix:
I'm running a DS162+ with 6 each 16TB drives, using SHR for data protection for 1 disk failure., The drives are divided into two volumes. Volume 1...
I have two 3TB HDDs configured with SHR 1-drive fault tolerance. My volume is at 95% of the capacity, and I'd like to change to RAID 0 or SHR-1...
Hi,
Recently disaster struck and I lost access to my 8 x 8TB disks on my DS
I'm looking for help to find the synology config files that contain...
- Question
I currently have a QNAP TS-451 with four 8tb drives, 4.90 TB free of 21.2 TB. This is mainly for storing media for Plex. I don’t run Plex through...
Following on from Need to increase storage - a couple of options I'm taking the hint and want to use SHR rather than SHR-2 in future. I know I...
Hi from New Zealand,
Seeking advice on correct RAID choice.
Have new 4 Bay NAS (DS420+) with 1 20 TB Iron Wolf drive in each bay.
Running DSM...
Prior to ram upgrade, Wanting to run a benchmark to see if more ram changes things....
I didn't wait the entire 18 minutes.... and a pop-up came...
- Question
New synology 720+ and no data on the drives, brand new, I went with a 10tb and a 6tb
I was under the impression that a 10TB and a 6TB would give...
- Question
I have a DS920+ with 2x4TB drives on RAID 1. Slowly but eventually, I am using up the space. I have cleaned up some Plex videos and got back some...
I currently have 4 3TB drives in SHR. If I want to replace them with 4 6TB drives, do I have to add one at a time then rebuild the pool?
Thanks
- Question
Hi,
After ditching the WD Red 3TB disks due to 3 out 4 died, I decided to install new drives with clean install on my DS916+.
I bought 2 new...
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account on our community. It's easy!
Log in
Already have an account? Log in here.