HW & SW Compatibility

Discussion about the hardware (internal HDD/external HDD/USB printer) and software compatibility of Synology product.

Filter by prefix:

  • Question
Hi everyone, We have been caught out with purchasing a RS4021xs+ populated with Seagate 16TB ST16000NE000 drives. The disks do detect and show...
Replies
17
Views
3,101
  • Question
G'day, Searched for D4RD-2666-32G and RS18017xs+ and got no hits, so first post! I'm trying to upgrade the stock 16GB RAM on my RS18017XS+ as I...
Replies
0
Views
86
Hi all, just purchased a DS1821+ and installed 2x 16GB CT16G4SFD8266 Crucial DIMMs. The NAS boots normally and reports all 32GB of RAM just fine...
Replies
2
Views
370
After my initial upgrade to 6GB with a 4GB Crucial memory that lasted for more than 7 months with no problems, I've gone mad and upgraded the 220+...
Replies
26
Views
775
If anyone is interested… I grabbed a 4 GB memory upgrade for the DS220+ (for a total of 6 GB). Crucial 4 GB Single DDR4-2666 SODIMM 1.2V CL19...
Replies
14
Views
1,858
Hi Can any make/model of USB memory stick be used for storing encryption keys (then, later, reading while attached to the NAS) or do they have to...
Replies
3
Views
401
Hi, I have a WD My Book connected to my DS415play in one of the rear USB ports. I'm on DSM 6.2.4-25556. It was working fine until recently and...
Replies
7
Views
458
  • Solved
I recently bought a new 4TB disk to replace a failing one in my NAS. Until I did this I had not realised that Synology had a compatibility list...
Replies
5
Views
477
Recently updated memory from the stock 1x2GB to 2x4GB. Pretty simple process. I'm using Crucial 4GB, 204-pin SODIMM, DDR3 PC3-14900, Item model...
Replies
17
Views
8,020
I'm a little unclear. I have a ds1621+ with 4x 1gbe ports, link aggregated to my netgear managed switch. If get a 4 port nic for my pc and do the...
Replies
3
Views
318
  • Question
Hi All, Just configured my new DS1621xs+ and noticed that the chassis fans are constantly speeding up and slowing down when running any VM in VMM...
Replies
0
Views
396
I have a DS1019 with two WD External HDD’s connected to each of the rear USB ports, but one of the USB ports seems to loose connection at times...
Replies
2
Views
171
I installed a Timetec 8GB DDR4 2666MHz (DDR4-2666) PC4-21300 Non-ECC Unbuffered 1.2V CL19 1Rx8 Single Rank 260 Pin in my new 920+ after reading...
Replies
0
Views
334
I wasn't really planning on this upgrade but stumbled on a new 'Synology' branded ECC SODIMM for regular DDR4 money. I need more RAM than this...
Replies
9
Views
1,506
  • Question
So I bit the bullet and ordered the DS1621+ to upgrade from my older DS916+ ... the NAS comes with only 4g RAM (shame on Synology) ... adding...
Replies
78
Views
20,411
  • Question
Hi everyone! I upgraded my DS218+ with an 8GB Crucial stick (after having checked compatibility on NAScompares at the time). DSM correctly sees...
Replies
14
Views
831
So I’m expecting my new 1621+ in a couple days and I blew my budget in the NAS and the drives… I can’t really afford a RAM upgrade and plan to get...
Replies
3
Views
495
I brought a new Synology DS920+ and want to upgrade to 8GB ram. Does Samsung M471A5244CB0-CTD compatible with Synology DS920+? Or any other ram...
Replies
10
Views
1,673
  • Question
I'm considering RS1221+ or RS2421+ with WD SA500 SSDs + 10GB LAN for a new SAN config for our SMB virtualized servers (ESXI). I'm seeing that...
Replies
2
Views
1,325
Hey guys, I had three WD 4TB RED (WD40EFAX) drives in a self-built Linux file server. I replaced these into the file server for older drives that...
Replies
13
Views
2,052
Top