Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Topics about volume setup, boot/shutdown, initialization, DSM update, HDD migration.
- Threads: 673
- Messages: 5,336
Filter by prefix:
I'm on my way reinstalling my DS923+. I'm so tired of all noises related to my harddrives (the NAS is located very close to my computer) so I...
Hello🙂
I'm getting totally confused about making Volumes, do I need to make two volumes or just one large one.
It's a 4 bay but I'm only going...
- Question
I have DS1522+ (5 bay) with 4 disks. 2 x 18TB and 2 x 20TB, they are all in a single SHR1 volume right now. I am considering moving to SHR2 by...
I currently have a RS820+ 4 disks in use in a RAID 10. I am looking to change this over to SHR and looking for insights on the process of getting...
Hey everyone,
I’ve been running my DS220+ with SHR configured in RAID1. Recently, I transferred the drives to a DS1823xs+, and to my surprise...
Hi just thought I'd post some stuff that might be of interest.
Setup is a DS1821+ with 20GB RAM and Synology 10G Card (copper).
Drives are WD...
- Question
Hello,
I have a new DS1621+ with four 12TB Seagate IronWolf Pro HD's.
I have created a storage pool with RAID SHR and a total capacity of 32.7TB...
I'm currently in the process of migrating and want a sanity check against my procedure.
Currently running 2x12TB SHR on DS218+. I have purchased...
- Question
Hi I just purchased a new DS1821+ NAS and 5x 14TB drives. My intent was to use SHR2, However upon set-up I seem to have configured it to SHR...
Hello everyone, I want to make sure I have this right before making a mistake. I have a DS920+ with two 3TB drives currently installed with SHR. I...
- Solved
Basically my DS416slim uses Shared Folder Sync to mirror a folder on my main NAS. The 416 is running out of space and it already has the biggest...
DSM 7.0
Not seeing an increase in volume after replacing smaller drives with larger drives in an SHR raid
I have 4 disks in an SHR 1 array on a system using DSM 7. This is my first NAS so I did not upgrade from an older version of DSM.
I started with...
What I have: 3 x 6TB SHR Volume with 12 TB redundant storage (1 disk recently broken)
What I want: 2 x 18TB SHR volume with 18 TB redundant...
Hi everyone,
I just bought my first NAS, a DS220j.
I installed 2 HD in it and DSM.
Now I want to configure storage using Storage Manager.
By...
- Question
I’ve set up my 920+ as follows:
3 no. 4T disks in SHR (vol 1) for important data + 1 no. single disk (vol 2) for downloaded movies.
My logic is...
1019+ on the way. Planning set up. Should I use SHR or Raid 6? Any reason not to have just 1 volume?
Hi there... I am excitedly preparing for my new toy to arrive and want to be able to get it up and running ASAP after it arrives.
I have watched...
Hi,
Following a critical HDD failure at the weekend, I decided that I would setup my DS415Play again with SHR rather than just single storage...
There is still open question from my side: Is SHR better than RAID an when?
To be sure I will use SHR1 for specific type of SHR (mentioned in...
New member here.
So i have a 918+ running SHR with 3 x 6TB Drives (one empty slot) . After installing Moments im now running out of space (a...
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account on our community. It's easy!
Log in
Already have an account? Log in here.