Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Topics about volume setup, boot/shutdown, initialization, DSM update, HDD migration.
- Threads: 673
- Messages: 5,336
Filter by prefix:
Ok, newbie here with a ridiculous first thread title, I admit ;-)
Here's my problem statement: I have been taking (and continue to take) daily...
Hi,
I upgraded my DS416 from 4x3tb to 4x12tb and didn't see that it has a max volume size of 16tb
now after replacing the drives and repairing...
- Question
I'm confused again. I am rebuilding my NAS after a #1 bay failure in my old DS920+. I have been adding one drive (all used in previous Synology...
- Question
I have a new DS1621+ to recover from a #1 bay failure of my DS920+. As part of my change to the DS1621+ I opted to switch from RAID 10 to SHR. I...
Question
DS412+ not booting: serial console shows EFI Internal Shell missing boot devices, but EFI partition on internal storage seems intact
Hey everyone
I am having issues booting my DS412+ that appeared after I had shut it down for just a while to reposition the unit. The unit does...
Just purchased a new RS1619xs+, inc 4 x 10TB disks & extra RAM.
BACKGROUND
It's intended to replace our no-longer-really-needed pair of VMware...
- Question
Dears I'm lost
I had in ds220+ 2 storage pools each with one volume. I tryed to combine into 1 storage volume but I commited the mistake to delete...
- Question
Sorry to say that, but my problem is related to a DS120j. It was the first Synology NAS I've bought, and I did not read its full specs. I use the...
Hi,
I have a storage pool backed by RAID6 raid group using 4 disks 8T each. The pool contains one volume.
I bought 4 more disks 8T each, I want...
Hello. I have currently on my RS1221+ 4 HDDs in 'Storage Pool 1" and all in same volume called 'Volume 1'.
I purchased two new WD Red 2TB SSDs...
I am trying to install a new HDD in my DS1515+. The hard drives are brand new Seagate Exos X.
I have bought 3 of these drives, and 1 of them...
- Question
Hey everyone, I’m a beginner to intermediate user of Synology DS918+ so please forgive my ignorance or lack of knowledge in many areas of this...
- Question
Background info:
So I have a DS1821+ in SHR with drives in this configuration: 5x12TB and 3x16TB
I previously did a HDD migration from a DS1019+...
I cannot, for the life of me, remove a specific Volume or Storage Pool from my system.
I am running DSM 7+ on my DS918+ which has has the Dx517...
- Solved
Hi everyone. Sorry if this has already been covered -- It seems like it would be a common use case but my searches aren't hitting it. In short...
Hi All,
NAS DS920+ ...had 4 x 6TB WD drives.
Hot swapped Drive 4 with a 16TB Iron Wolf Pro. Volume 1. Shows as healthy and normal, but...
- Solved
This is just a quick conformation question:
I am running DSM 7
I have two Storage Pools 1and 2 - the Pool 2 [Volume 2 Basic Config RAID] is a 10...
Everything was working wonderfully for years and I’m pretty sure I screwed this up..
Here’s my setup:
Synology DS920+ running DSM 7.1.1 Update 4...
- Question
My NAS has two slots, each currently occupied by a 2TB HDD drive, mirrored. RAID SHR. I am running out of space and would like to replace both...
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account on our community. It's easy!
Log in
Already have an account? Log in here.