configure tp link er605 and Synology

[aggelospap97]

Hello I hsve addes a tp link er605 to my network in order to have my two isp on the tp link router to load balance the network .The problem is now I can't access my Synology server My two isp are connected to the tp link er605 and then from the tp link er 605 there is a switch which I have connected 7 pc and my Synology server

 

[Rusty]

I can't access my Synology server

Welcome to the forum.

Can you access the NAS via the switch? Is the NAS connected to the switch or to the router? Also, when you say you can't access the NAS, what method are you using exactly?

 

[aggelospap97]

Welcome to the forum.

Can you access the NAS via the switch? Is the NAS connected to the switch or to the router? Also, when you say you can't access the NAS, what method are you using exactly?

The nas is connected to the switch which also have the pc’s connected . Before I was accessing the nas from Mac finder with its address name. I didn’t need its ip address just the name that I gave it and username a password . Now when I try to see the synology server I cannot see it on my network . And if I try to connect with the previous method is says it cannot find it

 

[Rusty]

And if I try to connect with the previous method is says it cannot find it

When you search it from your Mac using the Synology Assistant, do you get a result?

 

[aggelospap97]

Hello again . Yes I tried with synology assistant and I can’t see it again

 

[Rusty]

Guess you will have to use mode 1 reset method on the back of the NAS to reset the network settings in order to detect the NAS and continue forward.