- 13
- 6
- NAS
- ds212, DS213, DS213+, DS1010+, DS1515+, RS814
- Operating system
- Windows
- Mobile operating system
- Android
Hi,
I have a DS1010+ that appears to have a corrupt of blank internal Usb flash unit
When I try to boot the DS1010+ it gets a blue flashing power light
I have tried with all drives removed but no change
As the unit has the Vga port I connected up a monitor and could see that the unit tries to boot but gets an error about 'Grub loading stage1.5.'
The boot never goes past his even if the unit is left on all day
I have removed the little usb bord from the DS1010+ and using the usb connector I can read the details and see folders but no files
From this I assume that the Usb Flash unit needs to be refirmwared
If I connect a usb stick with windows 10 install on it, It will boot from it and if I let it it would install the windows 10
Does anybody know if it is possible to reinstall teh firmware to the USB Flash in the DS1010+ to allow me to install the DSM and reuse this unit?
thanks
David
I have a DS1010+ that appears to have a corrupt of blank internal Usb flash unit
When I try to boot the DS1010+ it gets a blue flashing power light
I have tried with all drives removed but no change
As the unit has the Vga port I connected up a monitor and could see that the unit tries to boot but gets an error about 'Grub loading stage1.5.'
The boot never goes past his even if the unit is left on all day
I have removed the little usb bord from the DS1010+ and using the usb connector I can read the details and see folders but no files
From this I assume that the Usb Flash unit needs to be refirmwared
If I connect a usb stick with windows 10 install on it, It will boot from it and if I let it it would install the windows 10
Does anybody know if it is possible to reinstall teh firmware to the USB Flash in the DS1010+ to allow me to install the DSM and reuse this unit?
thanks
David