DS720+ Noise write with virtual machine

[wonzer]

Hi guys,

I've a Synology DS720+ with RAM upgrade (10Gb) and 2 WD disk (2x4Tb).
When I power on a Virual Machine from my Virtual Machine Manager the system produce a very loud noise. This is the typical noise of the HDD when you write data into it.
How can I reduce this noise? There is the possibility to install 2 little SSD, create a disk pool for this SSD partition and move the virtual machine into the SSD pool?
Many thanks for your help!

Bye

 

[Rusty]

Guess you could move to ssd setup but you only have two bays so you mean to replace your hdds with ssds?

 

[wonzer]

I mean to use the SSD NVme cache (at the bottom of the NAS) to reduce the noise (1), or to create a second disk pool (2), but without remove the 2 hdd.
But I don't know if the (2) is possible...

 

[Shadow]

I mean to use the SSD NVme cache (at the bottom of the NAS) to reduce the noise (1), or to create a second disk pool (2), but without remove the 2 hdd.
But I don't know if the (2) is possible...

Not sure what you are trying to gain with 2. You end up with a second disk tool with 0 disks, because both your HDD's are already in a pool (assuming).

NVMe SSD's cannot be added into a disk pool afaik, only as cache.