I waded through the different drivedb databases today and, aside from the odd tweak here and there Synology is using a very old version of smartmontools.
Quite simply many database entries are too old or even corrupted to be actually useful.
The entry for my SSDs have extra characters and question marks:
The database is a hot mess.
️
Quite simply many database entries are too old or even corrupted to be actually useful.
The entry for my SSDs have extra characters and question marks:
Code:
{ "WD Blue / Red / Green SSDs",
"WDC WDBNCE(250|500|00[124])0PNC(-.*)?|"
"WDC ?WDS((120|240|250|480|500)G|[124]00T)(1B|2B|1G|2G|1R)0[AB](-.*)?",
"", "",
"-v 165,raw48,Block_Erase_Count "
"-v 166,raw48,Minimum_PE_Cycles_TLC "
"-v 167,raw48,Max_Bad_Blocks_per_Die "
"-v 168,raw48,Maximum_PE_Cycles_TLC "
"-v 169,raw48,Total_Bad_Blocks "
"-v 170,raw48,Grown_Bad_Blocks "
"-v 171,raw48,Program_Fail_Count "
"-v 172,raw48,Erase_Fail_Count "
"-v 173,raw48,Average_PE_Cycles_TLC "
"-v 174,raw48,Unexpected_Power_Loss "
"-v 230,hex48,Media_Wearout_Indicator "
"-v 233,raw48,NAND_GB_Written_TLC "
"-v 234,raw48,NAND_GB_Written_SLC "
"-v 241,raw48,Host_Writes_GiB "
"-v 242,raw48,Host_Reads_GiB "
"-v 244,raw48,Temp_Throttle_Status "
"WD BLUE",
"WDC\\s+WDS(250G|500G|100T|200T)2B0B-00YS70",
"",
"",
"-v 5,raw48,Reassigned_NAND_block_count -v 9,raw48,Power-On_Count -v 12,raw48,Drive_Power_Cycle_Count -v 169,raw48,Total_Bad_Blocks -v 170,raw48,Grown_Bad_Blocks -v 171,raw48,Program_Fail_Count -v 172,raw48,Erase_Fail_Count -v 174,raw48,Unexpected_Power_Loss_Count -v 187,raw48,Reported_Uncorrectable_Errors -v 188,raw48,Command_Timeout_Count -v 194,tempminmax,Temperature_Celsius -v 199,raw48,CRC_Error_Count -v 230,raw48,Media_Wear_Out_Indicator -v 232,raw48,Remaining_Lifetime_Perc -v 233,raw48,NAND_GB_Written_TLC -v 234,raw48,NAND_GB_Written_SLC -v 241,raw48,Total_GB_Written -v 242,raw48,Total_GB_Read -v 244,raw48,Temperature_Throttle_Status"
}
The database is a hot mess.
️