[email protected] project in your NAS

Currently reading
[email protected] project in your NAS

239
112
NAS
DS218+ 8GB RAM, DS212
Operating system
  1. Windows
Mobile operating system
  1. Android
  2. iOS
Yeah, been crazy here, the press is camped outside my front door, phone calls/texts coming in like wild. :)

Going to have to get my speech ready.

1586745974395.png
 
239
112
NAS
DS218+ 8GB RAM, DS212
Operating system
  1. Windows
Mobile operating system
  1. Android
  2. iOS
Still losing contact with foldathome container for some reason...it's running fine, I can see it in Synology docker app, and in portainer, but can't access it's page at either:

<NAS IP>:7396
<NAS IP>:32787

Anything I should try specifically to keep this working. It was fine yesterday for a while, then when I went to check it it would not come up, and same today.
 

Attachments

  • 2020-04-13 08_41_10-Missy.jpg
    2020-04-13 08_41_10-Missy.jpg
    13.3 KB · Views: 9
141
36
NAS
DS1815+
Operating system
  1. Linux
  2. macOS
Mobile operating system
  1. iOS
Strange, have it here running on 2 devices (nas) and no problem with it. Have used linuxserver/foldingathome docker to run. Is port 7396 a problem? I see that it is mapped to another port!
 
239
112
NAS
DS218+ 8GB RAM, DS212
Operating system
  1. Windows
Mobile operating system
  1. Android
  2. iOS
Yeah, nothing I did, it defaulted to that for some reason, mapping 32787 to the container port.

Maybe I'll try changing that mapping and see what happens...
 
239
112
NAS
DS218+ 8GB RAM, DS212
Operating system
  1. Windows
Mobile operating system
  1. Android
  2. iOS
I mapped 7396 to 7396, tried to access it at https://192.168.10.5:7396 and it still fails. (Also tried http just for the heck of it.)

No idea why it worked yesterday for a while (using the old port mapping to 32787) and won't work now. Nothing has changed on my router or NAS in the last 24 hours, except Portainer install, but it stopped working yestarday before I installed Portainer.
 
239
112
NAS
DS218+ 8GB RAM, DS212
Operating system
  1. Windows
Mobile operating system
  1. Android
  2. iOS
Last edited:
Yeah, it's a fixed IP I set up when I first set the NAS up, always use fixed IPs w/my NAS, printers, pi, and a few other devices. I'm also logging into the NAS via its IP so that's a final confirmation. :)

Really odd. I'm going to assign the container to a different port at random and see what that does...

Mapping other ports didn't help, so letting this issue go.
 
239
112
NAS
DS218+ 8GB RAM, DS212
Operating system
  1. Windows
Mobile operating system
  1. Android
  2. iOS
Thanks, not using any NAS firewall features, all of that is handled by my EdgeRouter.

It's just really odd that it worked for a while and then stopped. Probably a family curse... ;-) If not for the current situation stuck at home I would not have spent this much time on it. LOL...boredom makes you do crazy things.
 
772
290
NAS
DS216+II, DS118, DS718+, DS720+
Router
  1. RT2600ac
  2. MR2200ac
Operating system
  1. Windows
Mobile operating system
  1. Android
239
112
NAS
DS218+ 8GB RAM, DS212
Operating system
  1. Windows
Mobile operating system
  1. Android
  2. iOS
It should be HTTP. But maybe give this Docker it's own IP address in your LAN. I dunno, maybe that'll help?

(Yes, I also cheated yesterday with my old AMD gaming PC... xD)

Thanks, @Shadow - I've tried http and https and neither work.

Your other suggestion sounds interesting - how would I create an an IP address on my router for the fold container?

Also - is there anything here in my settings that would cause issues like this?

1586907244488.png
 
239
112
NAS
DS218+ 8GB RAM, DS212
Operating system
  1. Windows
Mobile operating system
  1. Android
  2. iOS
Yes. Try unchecking the first one.

No joy after turning off the http to https redirect. And that was in place back when it worked a couple days ago so I'm still flummoxed about where/how I broke it. :) Thanks for hte suggestion. If @Shadow can tell me how to set an IP for a docker container I'll give that a shot.
 
3
3
NAS
DS718+
Operating system
  1. Windows
Mobile operating system
  1. Android
here's a snapshot of my docker logs.. note the new web connection line (when i log into the FAH local webpage.

Do you see that?

I had a bunch of problems using Brave web browser, but when i switch to FF.. the site loads up fine. wondering if maybe it's the client, not the container?

1586915066713.png

No joy after turning off the http to https redirect. And that was in place back when it worked a couple days ago so I'm still flummoxed about where/how I broke it. :) Thanks for hte suggestion. If @Shadow can tell me how to set an IP for a docker container I'll give that a shot.
 

Attachments

  • 1586915042955.png
    1586915042955.png
    312.2 KB · Views: 0
239
112
NAS
DS218+ 8GB RAM, DS212
Operating system
  1. Windows
Mobile operating system
  1. Android
  2. iOS
here's a snapshot of my docker logs.. note the new web connection line (when i log into the FAH local webpage.

Do you see that?

I had a bunch of problems using Brave web browser, but when i switch to FF.. the site loads up fine. wondering if maybe it's the client, not the container?
Excellent - thanks very much. Off to go logging... :)

I did try in Edge (primary browser is Chrome). Edge didn't work either.
 
239
112
NAS
DS218+ 8GB RAM, DS212
Operating system
  1. Windows
Mobile operating system
  1. Android
  2. iOS
Last edited:
BINGO - Firefox works - I can pull up the page fine using the mapped port that Fold-at-home selects in auto mode. Thanks for reminding me to try FF, @NASAdzy. One of my usual troubleshooting steps when I have issues in Chrome, and totally forgot it.

I then cleared cache and cookie/data for the last 7 days in Chrome and the fold-at-home web control site then showed up in Chrome w/out issue. So something got twisted around in my cache/cookies on this, it looks like.

EDIT: Couple hours later and it won't load again. Still works in Firefox, and works in a Chrome incognito window, so that's how I'll view it for now. :)

1586917589781.png
 
3
3
NAS
DS718+
Operating system
  1. Windows
Mobile operating system
  1. Android
BINGO - Firefox works - I can pull up the page fine using the mapped port that Fold-at-home selects in auto mode. Thanks for reminding me to try FF, @NASAdzy. One of my usual troubleshooting steps when I have issues in Chrome, and totally forgot it.

I then cleared cache and cookie/data for the last 7 days in Chrome and the fold-at-home web control site then showed up in Chrome w/out issue. So something got twisted around in my cache/cookies on this, it looks like.

EDIT: Couple hours later and it won't load again. Still works in Firefox, and works in a Chrome incognito window, so that's how I'll view it for now. :)

View attachment 1272
I have the same experience in the Brave browser... !
I just use chrome or FF :)
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Similar threads

Macvlan. The reason I choose it is because of you @Telos, you pointed out that tutorial in an old thread...
Replies
7
Views
5,973
Creating a Docker-Compose for al your running containers? Maybe you will also find this post useful . I...
Replies
4
Views
3,216
Thanks, @Telos - I was doing more reading, and it seems like making the CD drive on a laptop avaliable to...
Replies
2
Views
2,358

Welcome to SynoForum.com!

SynoForum.com is an unofficial Synology forum for NAS owners and enthusiasts.

Registration is free, easy and fast!

Trending threads

Top