Hi, more than a year ago I bought a DS918+ and I previously have an Lyonn UPS 800va. The Synology DSM never recognized the UPS as connected (Control Panel > Hardware & Power > UPS) but in the USB devices list from /sys/kernel/debug/usb/devices file it shows as follow:
...
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0665 ProdID=5161 Rev= 0.02
S: Manufacturer=INNO TECH
S: Product=USB to Serial
S: SerialNumber=ffffffd8ffffffb9ffffffd0ffffffa2
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
...
I want to try the blazer_usb driver, which I suspect it is the correct one. It there any way that I can try to force the load of that driver? Has someone tried to get that UPS recognized by DSM successfully? What commands or files I need to modify to do this? Any tip is welcomed, thanks in advance.
...
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0665 ProdID=5161 Rev= 0.02
S: Manufacturer=INNO TECH
S: Product=USB to Serial
S: SerialNumber=ffffffd8ffffffb9ffffffd0ffffffa2
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
...
I want to try the blazer_usb driver, which I suspect it is the correct one. It there any way that I can try to force the load of that driver? Has someone tried to get that UPS recognized by DSM successfully? What commands or files I need to modify to do this? Any tip is welcomed, thanks in advance.
