Hi
@atticus7 , welcome to the forum.
The first question is this: are you running PeakHour 4 v4.1.14? And is it's app icon and Preferences toolbar...
this:
View attachment 3712 View attachment 3713
or this:
View attachment 3714View attachment 3715
The reason I ask is that the v4.1.14 with square icon was apparently released accidentally. I found this one didn't work with any of my previously working SNMP sources. They acknowledged this and provided the corrected version, with the normal round icon, and is now available from their website via the Trial button.
Back to settings that work for me...
SRM -> Control Panel -> Services -> System Services
- Enable SNMP
- Enable SNMPv3 service
- Enter username and password you want for this device.
PeakHour -> SNMP Device Details
- Device Name: LAN IP address of router
- SNMP version: V3
- Security Name: the router's SNMP username you used
- Security Mode: Auth
- Auth Key: the router's SNMP password you used
- Protocol (auth): MD5
- Privacy Key: <blank>
- Protocol (privacy): AES ... but shouldn't matter
- SNMP timeout: 2s
I monitor four interfaces (so four PeakHour 'devices'), my best guesses were:
- WAN: eth0
- WLAN 5GHz: wlan0
- WLAN 2.4GHz: wlan1
- LAN: eth2
You can also monitor DSM NAS. Here you get the choice of auth protocol, MD5 or SHA, and enabling privacy (which the SNMP client optionally uses, or not) with DES or AES privacy protocol. If you decide to use privacy the select Auth_Priv as PeakHour's Security Mode.