Hello, I am struggling with finding a way to connect into my storage from external network and i feel like i hit a wall
-VPN connects but when I try to access the storage through \\192.168.1.142 returns "Windows Cannot access \\192.168.1.142"
-When I'm connected to VPN If I ping 192.168.1.142(nas IP) it returns Request Time Out
-I can access the DDNS name while I am connected to VPN, doesn't work for internal IPS only
-Firewall is disabled on NAS also on the machine I try to connect from
And i made static routing from NAS, my router doesn't seem to have that Option in the interface, i feel that's a possible issue
-VPN connects but when I try to access the storage through \\192.168.1.142 returns "Windows Cannot access \\192.168.1.142"
-When I'm connected to VPN If I ping 192.168.1.142(nas IP) it returns Request Time Out
-I can access the DDNS name while I am connected to VPN, doesn't work for internal IPS only
-Firewall is disabled on NAS also on the machine I try to connect from
dev tun
tls-client
remote test.synology.me 1194
# The "float" tells OpenVPN to accept authenticated packets from any address,
# not only the address which was specified in the --remote option.
# This is useful when you are connecting to a peer which holds a dynamic address
# such as a dial-in user or DHCP client.
# (Please refer to the manual of OpenVPN for more information.)
#float
# If redirect-gateway is enabled, the client will redirect it's
# default network gateway through the VPN.
# It means the VPN connection will firstly connect to the VPN Server
# and then to the internet.
# (Please refer to the manual of OpenVPN for more information.)
redirect-gateway def1
# dhcp-option DNS: To set primary domain name server address.
# Repeat this option to set secondary DNS server addresses.
#dhcp-option DNS DNS_IP_ADDRESS
pull
# If you want to connect by Server's IPv6 address, you should use
# "proto udp6" in UDP mode or "proto tcp6-client" in TCP mode
proto udp
script-security 2
comp-lzo
reneg-sec 0
cipher AES-256-CBC
auth SHA512
auth-user-pass
<ca>
-----BEGIN CERTIFICATE-----
XX
-----END CERTIFICATE-----
</ca>
And i made static routing from NAS, my router doesn't seem to have that Option in the interface, i feel that's a possible issue