Raidrive + Webdav connection problem

Currently reading
Raidrive + Webdav connection problem

3
0
NAS
DS418
Operating system
  1. Windows
Mobile operating system
  1. Android
Hello. I use Raidrive app. to mapp and access the NAS folders remotely. Recently I had to move my NAS to another location and I have the following network configuration:
Router 1 (connects to the internet) - Router 2 (wire connection to router 1) - NAS (connected to router 2)
Unfortunately with this configuration I cannot make the webdav to work. I think its a port forwarding issue.
Router1 has fixed ip (8x.xx.xxx.xxx)
Router2 has local ip (192.168.1.xxx)
NAS has local ip (192.168.2.xxx)
In Raidrive configuration, if I set the the fixed ip (8x.xx.xxx.xxx) it will not connect.
Is there a way that webdav can function in this environment?
 
So R1 is ISP router i’m guessing? If so it should have its own on ip address.

How is exactly R2 connected to R1? WAN or LN port?

Can you give a bit more info on the configuration of those routers?

One idea is to make a new R1 LAN IP address that you will use as a DMZ ip address on R1.

That same IP can then be configured on your R2 as a ip address for its WAN port.

in that case all tragic from the internet via R1 will pass through to your R2 and you can do port forward and firewall settings on that device alone, eliminating another point to do the same.
 
Hi. The R1 router is a normal router (not ISP) that has other devices connected on LAN ports. I connected my R2 router to R1 since I wanted to create my own local network, separated from the existing one.
The cable that connects R1 and R2 is plugged LAN on R1, and WAN on R2.
If I configure DMZ on R1 will it affect the other devices that are plugged in to R1 router?
 
Ok so R1 is not isp router but it your internet gateway?

I ask because the way you connected them tells me that it is. Also that ip address of its points to a public range.

If I configure DMZ on R1 will it affect the other devices that are plugged in to R1 router?
no it wont
 
Did the recent WebDAV update help?
72b8SLr.png
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Similar threads

Hi! I have a DS916+ NAS that I would like to use as shared files server for our firm. I have setup a...
Replies
0
Views
2,007
The Synology Drive mobile app uses Web ports, but the Synology Drive desktop client uses a non-Web service...
Replies
3
Views
3,661
I have a one-time-only need to transfer files from a DS110j to a DS218+ (basically replacing the 110 with...
Replies
0
Views
664
  • Question
FWIW, I use WebDAV to map folders from my DS110j to a Win10 laptop. Perhaps importantly for this thread...
Replies
16
Views
3,044
Hi, i have tried the whole afternoon und it still doesn't work. I am on DSM 7. I have installed the...
Replies
13
Views
7,227
I left my WebDav problem for a while, but I looked at it again this evening as it bugged me that it did...
Replies
5
Views
3,041

Welcome to SynoForum.com!

SynoForum.com is an unofficial Synology forum for NAS owners and enthusiasts.

Registration is free, easy and fast!

Back
Top