Hi everyone, I am trying to create a simple network consisting of Synology Network Attached storage (NAS), TP-link POE switch and UAP HD and it wont have access to the internet. I have activated the DHCP server on the NAS and assigned An IP address for the access point. To configure the AP. I have already a unifi controller installed on my macbook managing another network. I connected my macbook to the network via ethernet cable to the switch. Then i created a new site on my controller and and adopted the AP to it. The AP has the assigned IP that i chose for it on the NAS so I confirmed that the DHCP server on my NAS is working. Then I created a new wireless network for this site. I checked using another device that the WAN is working and I connected to it and i was able to access the NAS files. Afterward, I disconnected my macbook cable from the switch. At this point an issue starts. I was not able to connect to the AP via Wifi. i tried to connect via several devices but with no luck. I connected my macbook to the switch and the wifi started to work normally!!!
I tried my best but could not solve it. Does anyone have experience with connecting unifi AP to synology NAS.
looking forward for your reply
I tried my best but could not solve it. Does anyone have experience with connecting unifi AP to synology NAS.
looking forward for your reply