In the past on SRM 1.2 I had dual WAN with 88Mbps/Xifinity on WAN1 and 8Mbps/DSL LAN1/port1 working.
However I had turned off Xfinity a couple of months ago, and only using 8Mbps/DSL WAN1
A couple of weeks ago upgraded RT2600 and on SRM 1.3.1-9346 Update 1. Its Using a single 8Mbps/DSL connection on WAN1 and no problems.
Now I'm turning Xifinty backon (not as simple as it sounds) and trying to use dual WAN setup again
With SRM 1.3 I'm finding that when I make a change in Network Center > Internet > Connection
and then Apply, it saves very slowly and sometimes the Network Windows is hanging. and only way out is to reboot it.
Its intermittent. Suspecting that storage was having a silent problem, I reformatted the USB stick, and then let it run overnight.
I moved the DSL to LAN1 and enabled it as default, and the Xfinity to WAN1 - and had it working (sorta).
I tried switching the WAN to "Active" and apply.
It was slow and "Failed to load the required resources" - see bottom of snapshot,
I'm getting a lot of other hard to describe problems, but seems to me this "Failed to load the required resources" absolutely shouldn't happen and need to get to the bottom of it before tackling the other issues
Just wondering if anybody else seeing this or have some idea of what is happening ? Probably my next step is report it to customer support at Synology.
However I had turned off Xfinity a couple of months ago, and only using 8Mbps/DSL WAN1
A couple of weeks ago upgraded RT2600 and on SRM 1.3.1-9346 Update 1. Its Using a single 8Mbps/DSL connection on WAN1 and no problems.
Now I'm turning Xifinty backon (not as simple as it sounds) and trying to use dual WAN setup again
With SRM 1.3 I'm finding that when I make a change in Network Center > Internet > Connection
and then Apply, it saves very slowly and sometimes the Network Windows is hanging. and only way out is to reboot it.
Its intermittent. Suspecting that storage was having a silent problem, I reformatted the USB stick, and then let it run overnight.
I moved the DSL to LAN1 and enabled it as default, and the Xfinity to WAN1 - and had it working (sorta).
I tried switching the WAN to "Active" and apply.
It was slow and "Failed to load the required resources" - see bottom of snapshot,
I'm getting a lot of other hard to describe problems, but seems to me this "Failed to load the required resources" absolutely shouldn't happen and need to get to the bottom of it before tackling the other issues
Just wondering if anybody else seeing this or have some idea of what is happening ? Probably my next step is report it to customer support at Synology.