Synology DS920+ compatible memories

[Johnson]

I brought a new Synology DS920+ and want to upgrade to 8GB ram. Does Samsung M471A5244CB0-CTD compatible with Synology DS920+? Or any other ram brand modules suggest that compatible?

 

[Telos]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[BiggPerci]

try this if you trying to avoid cost of synology branded ram, this is £21.59

 

[thebroughfamily]

I've got that Samsung model in mine and it's working fine.

 

[technorabilia]

As long as you don't pick Kingston or Transcend or you will wind up with a warning message.

 

[DaVoodoo]

try this if you trying to avoid cost of synology branded ram, this is £21.59

Does this give you a warning? On the Crucial page it states compatible with ds920+

 

[technorabilia]

Does this give you a warning? On the Crucial page it states compatible with ds920+

No.

Only memory from the following vendors will give a warning message on the DS220+, DS720+ and DS920+.

Kingston
Transcend
0198 (HyperX = Kingston?)
014F (Transcend?)

 

[DaVoodoo]

No.

Only memory from the following vendors will give a warning message on the DS220+, DS720+ and DS920+.

Kingston
Transcend
0198 (HyperX = Kingston?)
014F (Transcend?)

Thanks for the quick reply. Much appreciated

 

[fozzylou]

I have installed
lTimetec Hynix IC DDR4 2666MHz PC4-21300 Unbuffered Non-ECC 1.2V CL19 2Rx8 Dual Rank 260 Pin SODIMM 16GB on DS920+ running DSM 7.0
Amazon Price £78.99
I’ve had no problems whatsoever it runs like a dream.
DSM Info shows full 20GB
Memory test came back no errors at all

 

[technorabilia]

FYI.

A list of compatible and working memory can be found here.

It is mostly in Dutch but just look at the Synology model heading and the Manufacturer and Part number columns in the table and you will be alright.

 

[Shadow]

FYI.

A list of compatible and working memory can be found here.

It is mostly in Dutch but just look at the Synology model heading and the Manufacturer and Part number columns in the table and you will be alright.

[offtopic]
Hey you look familiar. Welcome to this forum!
[/offtopic]