I run a Synology E10G18-T1 in one of my NASes and it has been ticking along for a few years now. In all that time it has not had a firmware update nor has Synology added anything to DSM to enable their NICs to be updated in-situ.
The firmware on the NIC is from 2018 and has been superseded many times over:
Underneath the Synology badge the NIC is a regularAtlantic / Aquantia / AQtion / Marvell / Whatever-Next AQC107. Are people just ignoring the updates or pulling the drivers and firmware updates direct from Marvell or from a different vendor of the '107 card?
?
️
The firmware on the NIC is from 2018 and has been superseded many times over:
Code:
Rob@Rivendell:~$ sudo ethtool -i eth4
Password:
driver: atlantic
version: 2.4.3.0
firmware-version: 3.1.30
expansion-rom-version:
bus-info: 0000:01:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: yes
Rob@Rivendell:~$
Underneath the Synology badge the NIC is a regular
?
️