Who can provide DS218 Image Dump to rescue blue blinking NAS

Currently reading
Who can provide DS218 Image Dump to rescue blue blinking NAS

5
0
NAS
DS620slim, DS2413+, DS414slim, DS214play
Operating system
  1. Windows
Mobile operating system
  1. iOS
My DS218 is blue blinking.

It turned out, that the image on the mainboard (stored in a MX25L6433F Flash Chip) is damaged.
it does still look good, but its not starting. The error mesage is different each time so no clear error.
This is only 8 MegaBytes of Data, but it can not be re-created somehow.
To rescure the unit I need a donor who can provide an image dump from a working DS218 unit.

The image can be created on 2 different ways:
1. via serial connection on the mainboard
2. via ssh on running DSM
I can provide a manual for both ways.

The image consits of 5 partitions.
mtd0 (1.048.576 Bytes) = uboot_DS218
mtd1 (3.080.192 Bytes) = zImage
mtd2 (4.190.208 Bytes) = rd
mtd3 (65.536 Bytes) = vendor
mtd4 (4.096 Bytes) = config (?)

= total 8.388.608 (8 MegaByte)
I need all of them.

If somebody is willing to do the job please respond here.

For all those who think I'm on the wrong way here:
I found such an image in the Internet, but not from a DS218 but from a slightly different DS418J (only 2 Cores and 1GB of RAM). With that the DS218 is running fine. That gives me hope that it could work. But I need an Image.
 
Hello

Too late, the Unit could not be restored.
It probably had a Hardware Defect and never worked with any DS218 Image

Thank you for trying.
Nico
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Similar threads

If there is no data on new drive. Try to swap 2 drives on da218+ and try to install the dsm gain?
Replies
9
Views
499
  • Question
I checked NAS itself with DSM. The status of the drive(s) and volume is "good". I have uploaded the latest...
Replies
2
Views
730
try and connect the drive using the usb port and copy the content. Once that is done you can then try and...
Replies
1
Views
1,486
Hi there. Considering that you are running 2 separate basic volumes, you will have to configure the new...
Replies
1
Views
1,906
  • Solved
Thanks Rusty, I've been reading a few articles and guides, and been trying to find a better way to make...
Replies
2
Views
1,827
  • Question
The original storage pool, using the remaining drive, will will be marked as degraded and DSM will...
Replies
3
Views
1,513

Welcome to SynoForum.com!

SynoForum.com is an unofficial Synology forum for NAS owners and enthusiasts.

Registration is free, easy and fast!

Back
Top