Question DS412+ not booting: serial console shows EFI Internal Shell missing boot devices, but EFI partition on internal storage seems intact

[Vitaliy]

You simply need to copy the files to the flash drive using Linux. Do you have a second DiskStation/RackStation... any model will do?

I have D-Link DNS-320.
Do you have image can be used for it?

 

[DSfuchs]

I have D-Link DNS-320.

Is it also running Linux there, and do you have SSH access with root privileges?

 

[Elextrixman]

I'm not really pro in software. More in hardware. Could you please lead me to how to restore under Win10. What image I can use for it?
Could it be problem with BIOS crush? Is it possible to restore it without removing?

We usually use HDDRAWCOPY to move files over and from the eDOM. I can build a image form donor if you want. But I would need the serial number and mac addresses. As those get put in the donor with their checksums calculated, and then you can run the image. But the problem you are having doesn't sound like eDOM. Maybe better if you describe it in detail when you power on the unit. As I read you get solid blue, and then flashing again? Does it even beep. The beep is the post boot indicator. When has loaded correctly into memory from the eDOM.

 

[DSfuchs]

We usually use HDDRAWCOPY...

He already created the image before. He can then send you the vender file from that.

 

[Elextrixman]

He already created the image before. He can then send you the vender file from that.

What image does he want then? eFLash, or Bios. I have both.

 

[Elextrixman]

He already created the image before. He can then send you the vender file from that.

Is this for the D-Link DNS-320.?

 

[DSfuchs]

What image does he want then? eFLash, or Bios. I have both.

It's about the DoM image.

 

[Elextrixman]

legacyfiles.us.dlink.com - /DNS-320/REVA/FIRMWARE/

 

[Elextrixman]

He needs a donor DOM for the 412+?

 

[DSfuchs]

Is this for the D-Link DNS-320.?

No, this is about the Synology DS412+

 

[Elextrixman]

What does he need?

 

[DSfuchs]

He needs a donor DOM for the 412+?

I already provided him with the broken/missing files here in #191/#193.
It would be nice if he could do a little bit of the input/work for us. Maybe you'll have better luck.

 

[Elextrixman]

Oh. OK. Sorry. Missed that and caught the tail end of the convo. OK. Thanks!

 

[Vitaliy]

We usually use HDDRAWCOPY to move files over and from the eDOM. I can build a image form donor if you want. But I would need the serial number and mac addresses. As those get put in the donor with their checksums calculated, and then you can run the image. But the problem you are having doesn't sound like eDOM. Maybe better if you describe it in detail when you power on the unit. As I read you get solid blue, and then flashing again? Does it even beep. The beep is the post boot indicator. When has loaded correctly into memory from the eDOM.

It would be nice if you can create image I can use in flash. Here is the board info:
MAC: 0011322508FB
MAC: 0011322508FC
S/N D8LIN05150

Where from to download HDDRAWCOPY? Here are too many sources and most of them spam
I cannot be sure if it is BIOS corrupted or flash.
Oscilloscope does not show any activities on 25Q03213. Supply 3.3v and same level on data pins. Dead?

 

[Elextrixman]

It would be nice if you can create image I can use in flash. Here is the board info:
MAC: 0011322508FB
MAC: 0011322508FC
S/N D8LIN05150

Where from to download HDDRAWCOPY? Here are too many sources and most of them spam
I cannot be sure if it is BIOS corrupted or flash.
Oscilloscope does not show any activities on 25Q03213. Supply 3.3v and same level on data pins. Dead?

HDDRAWCOPY is here

HDDGURU: HDD Raw Copy Tool

This freeware HDD Raw Copy utility duplicates almost any media and creates sector-by-sector images (raw or compressed) for restoration at a later time. Tool supports SATA, IDE, SAS, SCSI, SSD hard disk drives. Will also work with any USB and FIREWIRE external drive enclosures as well as SD, MMC...

hddguru.com

Is the file you need for the 412+?

 

[Elextrixman]

It would be nice if you can create image I can use in flash. Here is the board info:
MAC: 0011322508FB
MAC: 0011322508FC
S/N D8LIN05150

Where from to download HDDRAWCOPY? Here are too many sources and most of them spam
I cannot be sure if it is BIOS corrupted or flash.
Oscilloscope does not show any activities on 25Q03213. Supply 3.3v and same level on data pins. Dead?

This is your eDOM file with your info and checksums done for the 412+

VITALITY eDOM file 412+.img

1 file sent via WeTransfer, the simplest way to send your files around the world

we.tl

 

[Elextrixman]

It would be nice if you can create image I can use in flash. Here is the board info:
MAC: 0011322508FB
MAC: 0011322508FC
S/N D8LIN05150

Where from to download HDDRAWCOPY? Here are too many sources and most of them spam
I cannot be sure if it is BIOS corrupted or flash.
Oscilloscope does not show any activities on 25Q03213. Supply 3.3v and same level on data pins. Dead?

This is your bios file:

WeTransfer | Send Large Files Fast

The simple, quick and secure way to send your files around the world without an account. Share your files, photos, and videos today for free.

we.tl

 

[Vitaliy]

No luck

 

[Vitaliy]

I can read it to image. In image I can find serial number. Looks like reading is fine. Why I cannot write image to drive?
Does it have any write protection?
About BIOS chip. As I mentioned above, the chip is powered 3.3v but oscilloscope does not show any activities on data lines. Also no activity on TX of serial port. Is any possibility to check BIOS chip without removing it?

 

[DSfuchs]

Why I cannot write image to drive?

Which program did you use to back up your image first? Use it to write it back.