vlan

What's a practical best networking practice for a seldom used, usually offline printer, using an RT6600ax with VLANs. We currently have two VLANs: - 'Primary' for 9xApple devices and 3xNAS, as well as the printer - 'IoT' for Kasa lighting controls and doorbell cameras, smart TVs, and...

I recently migrated my home network to a new VLAN‑segmented UniFi setup. My main Synology NAS (1525+), and the majority of my other devices are all visible and I can connect however, my Backup NAS (918+) is still unreachable. UniFi can see the Backup NAS as a connected client (MAC address...

TL;DR Inter-VLAN routing on the RT2600ac running SRM 1.3 appears to be one-directional. Traffic from my IoT VLAN to my Primary network works perfectly. Traffic initiated from my Primary network to my IoT VLAN is silently dropped regardless of firewall rules. Routing table looks correct...

Currently I'm utilizing gluetun to accomplish this however there's a lot of VPN encryption overhead that inherently slows everything way down utilizing this method. I'd much rather utilize an established VPN I have setup on a separate VLAN on my gateway and simply setup one of the unused...

With DSM, can you specify multiple subnets for a firewall rule or do I need to create a rule for each VLAN? I have the following subnets: 10.0.1.0/24 through 10.0.10.0/24 with 10.0.20.0/24 as well. I tried entering 10.0.0.0 with subnet 255.0.0.0, which didn't include all of the 10.x subnets...

When creating rules in router Firewall, You Can create illegal rules.... System will not tell you it's illegal... It just sits there, doing nothing.... (No hits on rule over time is an indication of this, if you go out of the way to try and test this).... Love Hits! My question is: regarding...

System here fully operational for years, but has hardware scattered in various rooms, Connected together by Patch panel in each room... or in garage, and all tied together in computer room panel and un-managed switch.. And all devices presently on a single subnet.. All switches are...