1621+

Hi all, hope you can help. I have an old DS414 where I need to move the data to a newer ds1621+ I have 4 disk 3tb in the 414 and will start with 2x16tb in the 1621+ I hope I would be able to use the 4 disks in the 1621+ in the future. Can I setup a volumen with 2x16tb BTRFS file system. and...

I will be purchasing one of these soon. This will be for home use. It be used for backing up five computers, video, and Photo editing, and running VMs and containers. I thinking install six hard drives for one volume and two SSD'S to run containers and VM's, Or should run all hard drives? I...

I installed a 10Gbe card in my NAS and added a Sonnet 10Gbe from thunderbolt to my iMac. It all worked fine albeit at 1Gbe speed. Then today I replaced my 1Gbe Netgear switch for a GS110EMX having 8 1Gbe port and 2 10 Gbe ports. If I connect via the slower ports all works fine albeit at the...

I would like to buy the Synology DS1821+ or DS1621+ and run 6 x Toshiba MG07ACA14TE in Raid 6. The Toshiba MG07ACA14TE is currently the cheapest enterprise hard disk (with 14TB) and costs around 300 euros retail. The Blackblaze HD statistics show good values for a similar Toshiba model...

Not sure if this is a problem….I previously purchased 10 TB Exos X10s for my DS418j as they were on the list for that model I just purchased 3 new ones, for the 1621+, and they are coming tomorrow. BUT I noticed this model is NOT on the 1621+ list. Not sure why, they should be just fine...

So I’m expecting my new 1621+ in a couple days and I blew my budget in the NAS and the drives… I can’t really afford a RAM upgrade and plan to get more next month (I’m addition to NVME drives for cache). My question is, I have 8TB from my old synology to transfer to this one and I’m dreading how...

New 1621+ coming in a couple days and I’m trying to figure out which HDD’s to use and which RAID configuration. It’s replacing an old DS412+ with 4x4TB HGST 7200RPM drives. I was initially planning for 8TB drives but the the cost of anything above 6TB has skyrocketed in the last couple weeks...

So, I didn't listen and jumped on the DSM 7 bandwagon, but I was afforded the opportunity to replace my DSM 1621+ which is on DSM 7 with an 1821+ that I have yet to spin up. I'm going with brand new HDDs in the 1821+ and would like to ask the best way to migrate from the 1621+ to the 1821+...