rt6600ax

RT and MR are backhauled with an ethernet cable. Connections behind the MR is pretty shaky (IoT devices go offline from time to time) so I started investigating. To my surprise a simple ping to any of my WiFi IoTs behind the MR gave me this graph: a drop to 0 every 60sec with a descending slope...

Hello I'm new to this forum... I'm just a regular/basic user, without deep networking knowledge (but inclined to learn). I already searched in the forum but couldn't find an answer yet. I'm running my home LAN on an RT6600ax, with the latest firmware release (June 2026). Quite happy with it. My...

I'm publishing this account in the hope it helps other affected WRX560 and RT6600ax owners experiencing the same issues. For context, I've been a Synology NAS user for around 20 years — I know the ecosystem well and I don't write this lightly. The pattern has been documented in this community...

Hi, I got alert on new SRM version: Release Notes for SRM | Synology Inc. Anyone installed it? Any issues with it?

I have relied on Safe Access for a long time to block advertising, especially on my Android phone. It has cleaned up so much clutter on news feeds and blocked loud popup games that then link to the Play Store. Occasionally it would not work for a brief period of time, which I attributed to the...

RT6600ax Before I reinstalled Threat Protection, the Class Policy list had 44 items shown. Now it only shows 4? See the list below. Does this list increase over time as threats are detected? Was this a change with the recent SRM Update 13? Im concerned that Threat Protection is not scanning...

I have four RT6600ax Routers, on acts as the router and the other three as WiFi Points in my 2800sf house. They have been working pretty well since they were released. In the beginning I did the typical occasional reboot of the entire network. Eventually I just scheduled weekly reboots. In the...

OK, here's my setup: AT&T Fiber Internet -> RT6600ax -> NordVPN -> DS220+, laptop, 2 PCs, Samsung TV, and a google nest. And here's what I'm trying to accomplish: For privacy, I want to have Nord running through the router to cover my home devices. I have an emby server running on the DS220...

I was told by Synology a few weeks ago "I have inspected the Debug Log from ticket #xxx and have found that there is corruption in the Router's configuration. The corruption is causing packet loss on Wi-Fi networks, and causing an over-utilization of RAM." I was asked to perform a hard-reset...

Hi team, This is my first post. I have a RT6600ax with two differents Vlans configured: Vlan 10 is safe Vlan with iphone and mac. The iphone is connected a wifi in this vlan. Vlan 30 is less safe Vlan with AppleTV and other streaming devices. I have tried to manage the Apple TV from the...

I have been using a Synology DS 1819+ almost since the formation of this hardware. I have had very few issues with the Synology system. I use and employ Presto File Server, Docker with RustDesk, and soon a Wazuh Siem server. My synology is an integral part of my life and without it, I would not...

As I think folk on here are aware I currently use a Netgear Orbi RBK53S Router / Mesh system on the home network, and if all goes well I'm planning to move on to a RT6600ax and two 2200s. IoT I've been reading up on the devices and one thing that folks stress is an important 'uplift' from my...

Hi guys I have built a mesh WiFi network with two routers - WiFi Points (Synology RT6600ax Uplink Wired). Both have current SRM (SRM 1.3.1-9346 Update 12). My problem is that when I look at the WiFi Clients connected to the second router, it doesn't show me their IP address anywhere near them...

I'm having issues with traffic control. Got ourself a new tv-hub which uses current WIFI. It works sort of. But if everyone in the house downloads stuff at the same time, the tv performs very badly. So I setup a rule "Guaranteed maximum download bandwidth" to 4000KB/s for the tv-device which...

If I want to expand my network, based on the RT6600ax I already have, I'm slightly confused about which Synology products go get. Seems like the RT6600ax is the only one capable of Wifi6 and if I buy a MR2200ac for example, which doesn't seem to handle wifi6, I guess I'll get worse performance...

Unable to find local dhcp settings on Synology RT6600AX router. Please advise.

Hi, I've been lucky enough to come into possession of 2 x RT6600ax routers. Unfortunately they are not working & I wonder if they can be saved? If so, could someone advise me how please? The first powers on but the Status LED remains static amber. Plugging a network cable into any of the LAN/WAN...

Is there a way to import updated certificates on a Synology RT6600ax running SRM 1.3.1 other than via the web interface? Background: My domain's certs are maintained and automatically renewed elsewhere. The provider of those certs (porkbun if it matters) enables an API for me to download the...

I picked up a rt6600ax to replace a rt2600ac recently. Prior my setup was running two rt2600ac's, one was the main router, and the other was configured to be an access point and had a cat 5e wired ethernet connection to it along with a Netgear Nighthawk router also wired with cat5e. ( channel...

Hi Everyone, I am the proud owner of a new (to me) RT6600ax! I am so excited but I've already had several issues. So, see ya around the forums! Talk soon!