Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

wrong

  1. drdoom

    repaired with wrong drive

    I accidentally pulled drive 6 from a DS2413+ stuffed with 2TB drives when I went to replace drive 6 in the attached DX1215 stuffed with 4TB drives. Realizing my mistake, I then re-inserted the pulled drive, pulled the defective drive from DX1215 bay 6, and replaced it with a new unit of the...
  2. W

    I think I may have used the wrong static ip address

    Hi I have little to no understanding of networks and DNS DHCP servers etc. I think I may have set the wrong static ip address on my 1821+. When I picked the static address I was not aware that it should be outside the DHCP server scope/pool range, which is: 192.168.86.20 to 192.168.86.250...
  3. S

    Active Backup for Business... gone wrong?

    Anyone using Active Backup for Business noticing that even the initial full backup is substantially larger than the full volume it's archiving? I'm using ABB for backing up PC's to a NAS, and I was disappointed to see that the product could not just do a specific user profile or directory, only...
  4. K

    DS finder wrong password

    Hallo, I recently "updated" my NAS with a new user name and password. Everything went smoothly on my computer but I can`t log into any of my mobile apps (DS Finder, Drive, DS file etc.). The app keeps telling me I have the wrong password. I only have one password so it can't be the wrong one or...
  5. F

    Synology DS216SE Wrong Ramdisk Image Format

    Hello, My synology DS216Se got bricked. I did try to do some stuff with CP2102 but i get to this step. Can someone help. Marvell>> setenv ipaddr 169.254.0.2 Marvell>> setenv serverip 169.254.0.1 Marvell>> tftpboot 0xf40c0000 zImage Using egiga0 device TFTP from server 169.254.0.1; our IP...
  6. O

    Mesh network clients constantly connect to wrong access point

    I have a network setup with an RT2600AC as my router, and two MR2200AC units as access points with wired backhaul - both placed probably 50-60 feet from the router. I have three primary networks: Homewifi, guest, and an IoT network that is 2.6 only. I have observed that my devices on the IoT...
  7. I

    DKIM with Mail Server - what am I doing wrong?

    Hi, I have a DS414 running DSM 6.2.4, and the current version of Synology Mail Server. Synology Mail Server has been working fine, but Gmail has started not accepting mail without DKIM or SPF, so I want to add DKIM. To understand my situation: I have a dynamic IP address, and I am using...
  8. S

    Brand new 720+ with SHR, Capacity looks wrong?

    New synology 720+ and no data on the drives, brand new, I went with a 10tb and a 6tb I was under the impression that a 10TB and a 6TB would give me 8TB of usable space, in shr, is this not the case? as can be seen in the picture it says total capacity of 5578m surely not correct?
  9. H

    Sorting on album goes wrong

    When I sort on album, I sometimes get more images of the same album, because in one album can be different album-artists. when I sort on album, I am not interested in Album artists, so how can I tell audiostation not to do this.
  10. N

    Active Backup telling me my certificate/password is wrong?

    Ok short story I noticed that my backup had not worked for the last month. When I tried to look into it my agent is telling me my certificate is wrong, and do I want to trust it or not. I wasn't sure if I should be just trusting the Certificate but TBH it's all over my local network, but...
  11. R

    Adaptive Load Balancing is allowing data to flow to the wrong NICs

    I have a DS3617xs with the 4 on-board gigabit ports and a 2x SFP+ card. I have a few users who don't need anything special speed-wise and I want them to use a bond made up of 3 bonded gigabit ports. I did that and it seems to be up and running. The default gateway ticker is checked on the bond...
  12. S

    DSM7 upgrade gone wrong

    Hi... I have successfully upgraded two NAS to DSM 7. This morning it was the turn of my main NAS. End result: no access. The initial upgrade went fine, I could login. After some initial random checks that things were good, I turned to my first objective that is to upgrade my Plex...
  13. C

    DS718+ bad drive replaced, but what did I do wrong?

    I have two DS718+. One is at home for mainly Plex. And one is at my office for file sharing. I got an email notification that one drive in the Office NAS has SMART errors. It was critical and needed attention. It is set up as RAID 1. I thought that one drive would continue while I figured...
  14. H

    Pihole - timezone wrong

    I'm trying to setup Pihole in a docker container on my synology. However, I'm having issues to get it to work. I think it has to do with the fact that my timezone in the container (UTC) does not align with my actual timezone (CET). I tried to get it changed but setting TZ to Europe/Amsterdam...
  15. P

    Wrong Date/Time for Videos despite correct EXIF-data

    Hi all, I've just transferred all my photos and videos from Google Photos to my new DiskStation. All worked very well except for one thing: all of the videos shot with my Pixel 3XL get a wrong date/time (more specifically: the time of the upload). I've spent hours investigating this but...
  16. F

    Wrong capacity of hard drives

    Hi there, I wonder if you can help decipher what is going wrong here. Long story short, but I recently had a major crash where 3 disks went at the same time. I have just reinstalled my system, but now it is showing a max capacity of 7.26 TB, which is way less than what it should be. Any ideas...
  17. L

    DSM firewall and trusted proxies, am I doing something wrong?

    Hi everyone, this is my first post on the forum although I've been passive reader for a while now. I posted a doubt yesterday on the synology subreddit but it doesn't seem to have attracted much feedback, so I though maybe you people would have some insight. I'm copying below what I wrote...
  18. E

    Available capactity wrong

    I just added a 6th HDD to my 1821+ I now have 6x14TB Seagate Exos X16 in SHR2. After it completed doing the parity check after a few days it didn't show any capacity increase. I found the option to expand the volume, and did that to max. Now, I see the correct available space, but it shows...
  19. J

    Wrong capacity of the hard drives

    Hello, This morning I had that strange information given by my NAS DS415+ : It tells me that I have been using 16 777 188 TB of data on my total of 5.4TB (of course it states that the NAS is full...) I have tried a file check without result. Any idea ? Has this already happened to you ...
  20. Telos

    Launching Drive from tray app... Wrong URL?

    What have I done now? When I click (Synology Drive) from the Windows Drive tray app. it tries to launch... https://secretword.synology.me/drive/?launchApp=SYNO.SDS.Drive.Application But this goes nowhere without the forwarded https port number. In Application Portal I have only alias "drive"...
Back
Top