Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

connect

  1. I

    Can't connect to DS412+ via direct Ethernet Connection to Start Repair

    I have a failing Volume with 4 6TB WD Drives. The most recent look of the drives showed Drive 4 Crashed and did not show a 2nd bay drive. Adding a replacement drive in Bay 2 got the DS unit to boot and having it hard wired to my Mac Mini I had hoped to access to the DSM to turn off beep and then...
  2. Y

    Cannot connect via DDNS on DS220J

    I was excited to hear that if I use DDNS instead of QuickConnect, I will be able to connect from outside even without the official app. I worked hard to set it up.Now I don't have to connect using the inconvenient official app... However, although I can connect using SFTP by directly typing the...
  3. H

    [RESOLVED] HELP. Locked out due to firewall settings, did soft boot but can't connect

    [RESOLVED] Need help badly. Was learning about certificates, reverse proxy etc., was playing with firewall settings and I locked myself out of my DS418play. Did the 4 second soft boot, heard the beep. I plugged my Linux laptop directly into the port, Downloaded and installed Synology...
  4. S

    IP Camera as VPN client

    Do the Synology IP Camera's have the ability to be a VPN client and connect to Synology NAS from a remote network over the internet? If not, are there any other Third party Camera's out there that can and that are compatible with Surveillance Station?
  5. B

    Can't connect with Drive Client through QuickConnect ID from one PC, but no problem with other ones (Windows/Mac).

    Hi guys, I have a fresh install with Windows 10 Enterprise LTSC, Version 21H2, Build 19044.5131 with Synology Drive Client 3.5.1-16102. NAS is DS118 with DSM 7.2.2-72806 update 1 and Synoloy Drive Server 3.5.1-26102 installed. I can connect trough local IP, not through QuickConnectID. Then I...
  6. A

    Can login to DSM on the web just fine but can't connect using synology drive client

    Sorry if this is in the wrong forum. I have a DS216J NAS. Basically for some reason I know not, I can access DSM just fine so I know that the domain name, web address, user name and PW are correct. I have synology drive server installed on the the NAS. But if I use the same info in Synology...
  7. A

    New Network - Cannot connect to NAS via quick connect or ping device

    Hello all, I've made an account seeking help with my NAS drive. I've just moved, and gotten my network set up. So today, I attempted to set up my NAS (DS1618+) - however, as the title indicates I am unable to connect to the device via quick connect or ping the device. For reference, my network...
  8. wizard99

    Creating Separate Photo Albums for Android Users via Quick Connect

    I wish to set-up Photo Back up for each users respective Mobile... but have two separate Albums that are NOT Shared... But Photos will not create the needed folders. I've done the following: 1) Set Access Privilege's in Users / Groups> Enabled Read/Write in "photo" 2) User Home, and tick...
  9. cgriell

    How to connect IMOU IPC-K2ECP (Ranger 2C)?

    Hi I've never used the SE, and I tried to connect the above mentioned camera, sold by Amazon. Box says that it is H.265, and I've read that "user name" is: admin, and password: the "safety code" printed on camera label. I've tried to add the camera using the attached file, but SE returns it...
  10. G

    After the router restarts, IPv6 cannot connect to Synology

    My Synology version is DSM 6.2.3, and My home network does not have public IPv4, only public IPv6. I use an ASUS router for dial-up, with the Synology connected to the router. Some time ago, I could access the Synology DSM normally using the IPv6 address (or DDNS domain name), but recently I've...
  11. R

    DS1512+ Unable to Connect

    I am unable to connect to my DS1512+. I can see it with Web Assistant, it has a valid IP. I can see it in my Router config page same IP. I actually have 2 Synology NAS. I can see and open the other. How do I restart the NAS without having to reset everything? I can see all of the drive lights...
  12. V

    DS220+ unable to connect to router, internet, QC, DDNS, Tailscale - only accessible locally

    I was messing about with AdGuard Home for a while and I think something may have been incorrectly changed, that I've been unable to figure out. My NAS was always on external access only via TailScale (v1.62) until last week when I upgraded to v1.64.2 (which is supposed to have a Synology fix...
  13. S

    Lost ability to connect to share from windows devices

    Up to the 10th March I losty the ability to log on to my shared folders from my windows devices, Windows 10, Windows 11, Server 2019. Basically I am stuck in a loop where the NAS prompts for a user name and password, and rejects the repsonse saying the password is invalid. This is the same...
  14. oRBIT

    RT6600ax Connect my PC + NAS with only one port making use of faster ethernet

    I've got the RT6600 router that comes with one 2.5GBE-port. But how do I connect my PC + NAS (assuming my devices supports it) with only one port making use of faster ethernet? Do I need another router (?)
  15. H

    Joomla does not connect to PHP 8.2

    I am using a locally hosted Joomla site on Web Station. It was installed using PHP 8.0 but now I want to update it to PHP 8.2. I can't figure out how to do this though. I updated both the default PHP profile and Web Service to 8.2, but the Joomla service still remains on 8.0. I am on DSM 7.2...
  16. G

    DSM 7.1 Recovery Wizard - Failed to connect to the server

    DS920+ w/DSM 7.2.1-69057 Update 3. Booting a Lenovo T530 laptop from USB recovery media to do a bare metal restore. The recovery media has worked in the past. I tried a second recovery media USB drive that has also worked in the past, too, with the same result. After booting, at the Log in...
  17. Ceasar

    Not able to connect Android Synology Drive app

    Hi, I have a Synology DS214+ and am trying to setup Synology Drive, seemed easy when I started it out, considering I got it to work within some minutes. The problem is, that was by connecting the Android app through my local IP (192.168.x.x). After that I've tried to open the correct ports...
  18. Grunter

    Connect NAS to new network

    My DS218+ NAS was set up and used successfully for several years on a local network using 192.168.1.2 with the router gateway 192.168.1.1. Since then I have moved to another house where the network is established under a different subnet at 192.168.0. (gateway 192.168.0.1). I can’t now set up...
  19. adamcovfan

    cannot connect to server

    hi i have the ds923+ i can't connect to it using the synology os or the app or quick connect ,y mac mini can see it and i can open folders etc any ideas what to do please? 1698862974 find.synology.com that finds it 1698863199 ive done the pin rest thing but ive not been asked to rest password
  20. D

    Two Synology NAS servers on one IP - Drive Client can't connect remotely

    Hi, I've tried googling this problem, but I'm struggling to find a definitive answer. The problem: We have a small office, with 6/7 staff. We've been using a DS216+II as a server using the Drive Client to connect to it. Everyone works in the office and at home, and we also have a number of...
Back
Top