installation

Hello, I got a RS10613xs+ (complete with all disks, etc) gifted to me a couple of years ago. I realize it's quite old from a business PoV, but I'd say it's more than doing what I ask of it at my house. That said, at this point it's completely EOLed by Synology, and so DSM for it is available...

Just received a new DS223 + 2x Seagate Ironwolf 4TB drives, plugged everything in and have been struggling for the past few hours - still not able to even see the control panel. It started OK, all LEDs came up as nice and green, DS Finder managed to find the NAS and I went through system...

I want to install Uptime Kuma. I believe I need Docker for my DSM 7.1.1 version. Else is there another way to install Uptime Kuma?

Hi. I recently purchased a DS1010+ NAS from a private seller. I would like to do a full factory reset on it, however the seller didn't have the Installation CD that originally came with it. Does anyone happen to have one that they could send me?

Recently purchased a second hand BST150-4T Beestation to replace my WD Mybook NAS which is no longer supported and has security issues. Problem is the Beestation it just sits there and balefully blinks its orange light. Tried reset, power cycle, and all support articles on the official website...

Hi folks, In recent days I've had an update issue with Jellyfin that corrupted my database so I've started fresh with a new install, but I've mistakenly installed it on the wrong volume on my NAS. I say wrong volume as I installed it on my first volume while my second volume contains all of my...

I see 7.3.1 is out now. Should/can I update from 7.2.2 now? Or wait until Synology tell me? As far as I know on the 918+ I'll need to do a manual install anyway. Thanks.

My previous post covers an attempt to fully Reset the DSM, and after running over 46 hours the status light was still blinking orange; so I shutdown, removed all 4 HDD’s, manually wiped them clean, and reinstalled them. Now I can't get Web Assistant to find my DS416Play. Following are all the...

Alongside my need to replace my SA3400 servers i also have several RS3618XS servers that are part of our DSM/SvS cms setup. What would be wise. Install new server alongside the old ones and have Migration Assistant do the heavy lifting? Does MA also take care of the cms part? Or would it be...

I'm very new to the CLI side of Synology stuff on my DS224+. There are two things I'd like to accomplish with this thread/question, first being to understand how to launch the CLI and then actually install Snipe-IT via that method, if possible. Only reason I'm set on Snipe-IT is due to the fact...

I have an RS819 (which has an rtd12296 CPU) in a colocation center, running DSM7.2.2. I want to replace it with an RS422+ (which has a Ryzen 1600 - different architecture) CPU. I will be doing this using HDD migration, at the colocation center. When the 422+ is installed, it should be...

Its not your problem but following on from the install help I got yesterday... I now have Standard Notes running. I know that because I can visit https://sn.mydomain.tld and I get the "Welcome to the Standard Notes server infrastructure. Learn more at Getting started with self-hosting" message...

I wish to get the metrics of my Synology NAS to my Prometheus which is hosted in a Proxmox Ubuntu VM. I am using this guide but it isn't well written, for example they forgot to mention I need to install go to make generate. A) Which machine am I suppose to clone the snmp exporter; the NAS or...

Have been using plex for several years without an issue. Recently I went to the PC to open plex to see if there was an update and to check settings and such. However, when I enter the address the plex logo appears for several minutes and then ask if I want to wait or exit. I posted this on the...

Ben playing around and successfully installed talescale on nas and android phone. However, with tailscale on the Synology, apps on my phone won't connect. I have also disabled Openvpn just to check if it was interfering or not which it isn't. I'm thinking it has to do with the app's login...

Afternoon everyone. Posting here cuz I'm not sure if this is even possible or not. Does anyone know if its possible to install DSM7 on a Synology DS1511+. I know officially Synology doesn't support this, but the hardware is x86 and I'm wondering if this is at all possible unofficially...

I can't find any easy to follow for the hard of understanding instructions on how to get Standard Notes running on Synology. Are there any? Or is it going to be harder than my (failed) attempts to get Bitwarden running? Apparently you don't need 57 containers any more... Or will I just stick...

Version: 24.0.2-1535 (2025-02-11) Important Notes Starting from this version, if you perform a clean install of the package, the "docker" shared folder will not have the "Hide this shared folder in My Network Places" setting selected by default. As of this version, settings for...

recently, yesterday, installed 923+, DSM 7.2.2-72806, 4 x 8TB ironwolf drives, 16gb ram, 2 x M.2 Sandisk wd_black sn850x 2tb. using 007revad's script(s) v2.0.29, the M.2's were setup as SHR-1. i tried both these options just to see if both would be configured and they were. 1) Multi...

I'm wanting to install Docker on my DS224+ however Docker does not appear in package manager. After a little searching I was disappointed to learn the DS224+ doesn't have AVX support but from what I understand it should still run non-AVX containers. I don't really understand how not having AVX...